I’ve zeroed my SH-GEN II 6x24x50. It is accurate but I’m only able to dial 3 mils windage left. (7 Mils to the right and 3 mils to the left) I’ve done the counting clicks to find center and zeroed from there. (130 clicks total = 65 clicks to the middle) Done that twice and still get the far left windage setting. Any suggestions on how to get the windage zero closer to the center. The elevation is perfect…. I’ve installed a 20 moa pic rail and I’m able to get 17 mils up elevation. Thx

I’ve zeroed my SH-GEN II 6x24x50. It is accurate but I’m only able to dial 3 mils windage left. (7 Mils to the right and 3 mils to the left) I’ve done the counting clicks to find center and zeroed from there. (130 clicks total = 65 clicks to the middle) Done that twice and still get the far left windage setting. Any suggestions on how to get the windage zero closer to the center. The elevation is perfect…. I’ve installed a 20 moa pic rail and I’m able to get 17 mils up elevation. Thx